SoloLuck

Bitcoin Miners You Can Buy in 2026: From Bitaxe to Big Iron

← back to pool

SoloLuck Blog · 2026-06-30

First, how to actually choose one

A “Bitcoin miner” is a special-purpose computer (an ASIC) that does one thing — guess hashes for the SHA-256 lottery. They range from a silent gadget on your desk to a screaming 3.5 kW industrial box. Three questions decide which is right for you:

Hashrate (TH/s) is just how many lottery tickets per second you hold; efficiency is how cheaply you buy them. Read every spec below through those two lenses.

Home & hobby miners — silent, plug-in lottery tickets

These sip power, make little or no noise, and set up in minutes over Wi-Fi or USB. None of them will out-earn their power bill at normal electricity rates — you buy one for the fun of holding a real, independent shot at a whole block, to learn, or for the heat. The Bitaxe family is fully open-source, so you truly own and can audit it.

Figures below are manufacturer specifications. Real-world hashrate, noise and especially price vary by firmware, production batch, cooling and where you buy — always check current numbers before you purchase. Nothing here is financial advice.

MinerHashratePowerEfficiencyNoiseApprox. price
Bitaxe Gamma (601/602)~1.2 TH/s~15–18 W~15 J/THnear-silent~$130–200
Bitaxe Gamma Duo (650)~1.6 TH/s~26 W~16 J/THnear-silent~$130+
NerdQAxe++ / NerdOCTAXE~4.8–9.9 TH/s~75–150 W~16 J/THquiet fan~$400–700
Avalon Nano 3S6 TH/s140 W~23 J/TH33–40 dB~$300

Great first miners for solo: a Bitaxe Gamma or an Avalon Nano 3S — plug in, paste your Bitcoin address, done.

The quiet-but-serious home tier: Avalon Q

If you want real hashrate without a jet-engine in the house, the Canaan Avalon Q is the current sweet spot. It pushes up to 90 TH/s (about 53 TH/s at its standard ~850 W setting) at a living-room-friendly ~39 dB, and doubles as a ~5,700 BTU/h space heater. Expect roughly ~$3,000. It’s the bridge between toy-sized home units and industrial ASICs: dozens of terahash of real lottery odds you can run in a spare room.

Big iron — industrial ASICs

This is where serious hashrate lives — and serious heat, noise and power draw. Most pull 3–5.7 kW, scream at ~75 dB (air-cooled), and want a 220–240 V circuit. Hydro and immersion models are far quieter and more efficient but need a cooling loop or tank. These make sense only with cheap power and a place that can handle the heat and sound.

Figures below are manufacturer specifications. Real-world hashrate, noise and especially price vary by firmware, production batch, cooling and where you buy — always check current numbers before you purchase. Nothing here is financial advice.

MinerHashratePowerEfficiencyCooling / noiseNotes
Antminer S21200 TH/s3,500 W17.5 J/THair, ~75 dBthe baseline current-gen
Antminer S21 Pro234 TH/s~3,531 W15 J/THair, ~75 dBbest all-round air-cooled
Antminer S21 XP270 TH/s~3,645 W13.5 J/THair, ~75 dBmost efficient air (~$6,800)
Antminer S21 XP Hydro473 TH/s~5,676 W12 J/THwater, quietneeds a cooling loop
Antminer S23 Hydro580 TH/s5,510 W9.5 J/THwaternext-gen flagship efficiency
Whatsminer M60S186 TH/s~3,441 W18.5 J/THair, ~75 dBMicroBT's S21 alternative
Whatsminer M66S++356 TH/s~5,500 W15.5 J/THimmersionfor immersion-tank setups

Efficiency leaders in 2026 are the hydro flagships (Antminer S23 Hydro near 9.5 J/TH); the best air-cooled efficiency is the S21 XP at ~13.5 J/TH. MicroBT’s Whatsminer line is the main alternative to Bitmain’s Antminers.

Which one should you point at SoloLuck?

Any of them works — SoloLuck is true solo and non-custodial: your username is your own Bitcoin address, you keep 100% of a found block minus our 2% on-block fee, and nothing is paid out through us. Just pick the stratum port that matches your machine’s size:

Host is stratum.sololuck.io, username = your-BTC-address.worker, password anything. Step-by-step per-device configs are on the Setup page. And remember the honest truth of solo mining: even a top ASIC is a lottery ticket against the whole network — bigger machines just hold more tickets.

Where to buy — and how not to get scammed

Buy hardware you will physically own and control. Good sources:

Red flags — walk away:

The rule that protects you: a real miner is hardware in your hands, mining to your own address. If someone promises mining profit without you holding a machine and your own keys, it isn’t mining — it’s a scam.

FAQ

Can a tiny miner like a Bitaxe really find a whole block?
Yes, technically — but it is extremely unlikely. Solo mining is a lottery: every valid share is a ticket, and a small miner holds very few tickets against the entire network. People run them for the fun of that long-shot chance, to learn, to support decentralisation, or for the heat — not as a reliable income.
What is the most efficient Bitcoin miner in 2026?
Among shipping machines, the hydro-cooled flagships lead — the Antminer S23 Hydro is around 9.5 J/TH. For air-cooled units the Antminer S21 XP is about 13.5 J/TH. Lower J/TH means less electricity for the same work, which is what determines whether mining is profitable at your power price.
Is home Bitcoin mining profitable?
It depends almost entirely on your electricity cost. With cheap power and an efficient machine it can be; with average home rates, small miners usually cost more in power than they earn. Many home miners treat it as a solo lottery, a learning project, or a heat source rather than guaranteed income.
Should I buy new or used?
New from the manufacturer or a reputable reseller gives you warranty and known condition. Used gear is cheaper but may be near end-of-life, run hot, or have worn fans — only buy used from a trusted source you can verify. Either way, never pay in a way with no buyer protection.
Which miners are quiet enough for a home?
The near-silent options are the Bitaxe family and other small boards; the Avalon Nano 3S is about 33–40 dB; and the Avalon Q runs near 39 dB while doing real hashrate. Industrial air-cooled ASICs (S21, Whatsminer) are around 75 dB — far too loud for living spaces unless you use hydro/immersion versions.

All blog posts · Mining guides · Start solo mining

Ready to take a ticket?

Paste your address and copy the config from /setup, watch the pool on /status, and check every claim on /verify. Mine to your own address — that is what makes it truly solo.

Get the setup config →

Not ready to point a miner yet? Run your gear through the odds calculator, or join Telegram for block & record alerts — no rig required.

More guides

Browse all guides →